Adaptive Energy Harvesting Micro-M PCB

PRODUCT SKU: ADEH-MM-A BRAND: AdaptiveTE

Specification

Length (mm): 25
Width (mm): 15
Depth (mm): 5

Datasheet

Enquire for pricing details.

Enquire

Features

Micro Module ADEH-MM-A is a small form factor energy harvester evaluation board targeting low power embedded applications where the main or auxiliary power requirements are fulfilled by means of thermoelectric generator(s) (TEGs) or a photovoltaic device. Low voltage (430mV) start-up capability enable harvesting operation from high impedance, low voltage ambient sources.

The evaluation board consists of two main blocks:

• Boost MPPT DC-DC converter
• Power meter with digital output
• The ADEH-MM-A DC-DC output can be used for battery charging while the on-board LDO provides regulated voltage for low power microcontrollers or sensors. Additional benefit is the low standby current which is typically 10µA in shutdown mode.Low voltage startup Vin = 250mV (5.0V max, Vin > Vout capable)
• Fixed output voltage Vout = 3.3V
• Auxiliary LDO output VLDO = 3.0V
• Power output –Pout MAX = 350mW (Vin=1.1V) / • Pout LDO MAX=350mW (Vin=1.1V)
• On-board 30mF super capacitor maintaining Vout
• MPPT configuration resistors
• On –board digital power meter (I2C output)
• Breadboard compatible form factor (0.1” pitch)
• Edgeplated connections
• Additional through-hole for direct connection of TEG module wires
• Optional board to board connector on the bottom side (Plugs and receptacles available separately)